Wednesday, October 3, 2007

Symptoms Of A Nymphomaniac

Audio / DIY / Speakers / QNPS-2 - The project: transducers

The choice of the transducers is presented simplified compared to QNPS-1, because the way they barely cover two octaves each.

Tweeter: Having a successful outcome would confirm the BG Neo3PDR

Mid-High: A good match with the Neo3 is definitely the Neo8: same "tone" and very linear response range assumed (1K2 ~ 5K). In addition, the size of the transducer is the same size of the wavelengths involved. Mid

: the possibility for the midrange are many, given the rather low bandwidth request (315 ~ 1250). The alternatives are currently:

TB W4-1337S (an overkill at this point, if they are still available)
TB W4-639SE (4 ", 8 Ohm, 6 g)
Morel MW 114-S (4" 8 Ohm, 7g, Neodymium)

Woofer: Having failed to confirm the excellent Peerless SLS12

Sub: for divers could recover the initial idea for the woofers QNPS-1: The 385 Dayton IB 15 ". Even at these frequencies because the NPS does not make much sense, and then you could use only one speaker. In this case you should probably put a couple of bridgre mono, because unfortunately it is only available in 8 ohms., but if you want adopt a push pull "the Linkwitz" the 15 "would be a little too oversized, and as such powers would return to space and 12", perhaps with greater excursion (type Peerless XLS12)

0 comments:

Post a Comment